Hoverboards may be one of the most popular modes of personal transportation today, but they come with their own set of challenges. One of the most common issues that users face is an off-balance hoverboard that tilts to one side. Not only does this make the hoverboard difficult to ride, but it can also pose a safety risk.
Fortunately, there are several steps you can take to fix an off-balance hoverboard. In this post, we will take a closer look at what causes a hoverboard to be off-balance and how to fix it.
Steps to fix a hoverboard
Following are the several steps that you can take to fix a hoverboard that is off balance.
Step One: Check the Tires
The first step in fixing an off-balance hoverboard is to check the tires. Often, the tires can become uneven due to wear and tear or extended use. If you notice that one tire is more worn than the other, it could be the reason for the imbalance. In this case, you will need to replace the tire with a new one to ensure even weight distribution. If the tires are still in good condition and the hoverboard is off-balance, move on to step two.
Step Two: Calibrate the Hoverboard
The most common reason for a hoverboard to be off-balance is a calibration issue. Fortunately, this can be an easy fix by recalibrating your hoverboard. Here is how you can do it:
- Turn off the hoverboard and place it on a flat surface.
- Press and hold the power button until the board beeps.
- Wait for the LED lights to start flashing.
- Step on the board with one foot, but keep the other foot on the ground.
- Press and hold the power button until the LED lights stop flashing.
- Step off the board and turn it off.
- After a few minutes, turn the hoverboard back on and give it a test ride.
This calibration method should solve the problem of an off-balance hoverboard. If not, there are a few other things you can try.
Step Three: Check the Motor
Another common cause of an off-balance hoverboard is an issue with the motor. Inspect the motors by removing the cover to see if there is any damage or loose wiring. If the motor is damaged, you may need to replace it with a new one. If the wiring is loose, you can fix it by connecting it back together. However, if you’re unsure how to go about it, you should consider seeking professional help.
Step Four: Check the Foot Pads
If none of the above fixes works, the issue could be with the footpads. Footpads are essential in ensuring the hoverboard stays balanced and upright. Look for any damage or wear and tear on the footpads. If there’s damage, it may be necessary to replace them. Although it’s possible to replace them yourself, it may be best to bring your hoverboard to a professional.
Step Five: Check the Battery
Another reason why your hoverboard may not balance correctly is due to low battery levels. Ensure that your hoverboard is fully charged before using it. Charging time varies depending on the model, so, refer to the manual for your specific charging time requirements. If your hoverboard’s battery is too low, it might stop working correctly. Always make sure you use the specified charger to avoid overcharging, as this too can result in malfunctioning.
Step Six: Check for Damage
If you have done the above and your hoverboard is still failing to balance correctly, it may have experienced damage. Inspect it for any visible damages, cracks, punctures, and dents. Damaged components might cause the hoverboard not to balance correctly. Ensure to repair or replace the damaged components; this may include the motherboard, the gyroscopes, or the wheel hub motor.
Step Seven: Check for Obstacles
Lastly, if you experience any difficulties in steering or balancing your hoverboard, it could be as simple as an obstacle in your path. Inspect the surface of the terrain, making sure it is even and clear of any obstacles that may cause the hoverboard to misbehave. Uneven surfaces may cause your hoverboard to wobble, and this will significantly impact your riding comfort and balance.
Conclusion
Hoverboards aren’t just a fun way to get around; they’re also very convenient. However, since they run on electricity, they will inevitably have some issues, including being off-balance. A hoverboard can become off-balance for various reasons. It could be due to wear and tear, loose wires, or damage. While some fixes can be done at home, others require professional handling.
Remember to always wear protective gear when working with your hoverboard. Don’t let an off-balance hoverboard ruin your joyriding experience. With the tips we’ve outlined in this post, you’re now well-equipped to fix it yourself or seek professional help.
Frequently Asked Questions
Q. Do all hoverboards self-balance?
Most hoverboards nowadays have a self-balancing mode, although there are still some old-school ones that do not. So, remember to check. But hey, if the one you have your eye on doesn’t have the mode, move swiftly on to the next.
Q. Why is my hoverboard wobbly?
The first rule when riding your hoverboard: Never let go of your hands! You need your balance to control where it goes. If you’re checking your phone or need to carry something, it’s best to stop and hop off first. If you’re still getting a wobble, it could be the effect of your hands being too light for the sensors. Remember to step on it, then try again.
Q. Why does my hoverboard beat?
This is similar to your board’s balance feature going haywire and needing a reset. Worry not, we’ve got you covered with these easy-to-follow steps to bring your hoverboard back into balance.
Q. Are hoverboards good for balance?
Hoverboards are awesome tools for improving your child’s balance and reflexes. Riding a hoverboard requires constant shifting forward and back, which enhances their ability to balance while honing their reflexes.
Q. Are heavier hoverboards better?
Yes, weight matters when it comes to hoverboards. A heavier hoverboard will have a larger motor, boosting its speed potential while also allowing more power for rough terrain and hill climbing. So, if you want a hoverboard that can go the distance, heavier is typically better.